Placement Testimonials - 2018

 

I am V KISHORE, completed my B.Tech (EEE) in 2017 from SITAMS University Chittoor A.P. Before joining Cranes Varsity I tried to get job but couldn’t succeed , and one of my college professor advised me to take Embedded as my career, and my one of senior told me to join Cranes Varsity who was a previous student and got his job through Cranes Varsity. After joining Cranes I have learnt many modules like C, C++, MATLAB, ARM, GOPS, RTOS.. I gained more knowledge on this module. During the course the interaction of staff was very good; at finally I got placed in SLN TECHNOLOGIES Bangalore. I am thankful to everyone in Cranes Varsity. Here I grabbed the theoretical and practical knowledge on Embedded systems which helped me to got the job.

Liya Mathew

V KISHORE
Placed in SLN TECHNOLOGIES
October 2018

I have joined the Cranes Varsity for training in Embedded Systems after a year gap from my completion of engineering. I enhanced my skills in C programming, DS, Matlab, ARM processors, Protocols in Cranes. It really helped me a lot to achieve this. Now am proud to say that I got placed in Continental AG, one of my dream companies. Cranes provided me a lot of opportunities which really helped me to achieve this. Happiest moment in the world is making your parents proud. I achieved it through Cranes. Believe in Cranes, Success is yours.

Divya Varghese

Thirunavukarasu Ganesan
Placed in Continental AG
September 2018

I joined course in the November 2017 when i was completed my BE i am so confused to what to do next one of my friend suggested me to join cranes varsity for Embedded course.The Embedded course in cranes varsity is very useful and helped me to get a job here the trainers are teach us C,C++,ARM7,MATLAB,CAN and Autosar,and Linux which was very helpful me to get a job,And trainers are friendly they had cleared all my Doubts and they provided 6 to 8 opportunities in a month they have given more 15 opportunities for me. So i thank all trainers and Placement team who have given more Support from them to get a placement in HCL.

Divya Varghese

Ravi Pattan
Placed in HCL Technologies
Augest 2018

I am Naveen from Nellore. I completed my B.tech in stream of Electrical and Electronics Engineering under the JNTUA University on 2017 pass out. After my B.Tech I was too much worried about my career due to one year gap and later through one of my friend suggested to join Cranes Varsity. On March 2018 I joined Cranes Varsity for Embedded system training. Here faculties are very well experienced, very supportive and friendly in nature. Will get both theoretical and logical building knowledge. Conducting module tests, brush up sessions which are very useful for interview. Mock tests are another advantage which helps for giving confidence to facing interviews. So many opportunities also provided until we get placed."The best feeling in the world is to know that your parents are smiling because of you". On this day, I proudly say that to makes my parents happy through Cranes Varsity. Finally, I got placed in HCL technologies. Thanking you for Cranes Varsity giving this great opportunity.

Divya Varghese

Naveen
Placed in HCL Technologies.
July 2018

I am very glad to get into this institute. I completed my B.E in ECE and I joined Embedded course in Cranes Varsity where I upgraded in C, C++, ARM,GPOS, RTOS. The trainers are very good and we were taught from the basics. Finally because of cranes I got placed in Tata Elxsi.

Divya Varghese

Divya Varghese
Placed in Tata Elxsi
June 2018

After completing degree I had no Idea how to get placed in a core company, So I joined cranes and gained good knowledge on C, Embedded and Linux. We had practical sessions which helped a lot to understand the concepts. Mock test helped to clear the interview. I thank Cranes and Trainers.

Shyam Kumar

Shyam Kumar
Placed in American Megatrends
June 2018

I completed Embedded Systems course in Cranes Varsity and got placed in "Rockwell Collins" company. I had to undergo many technical rounds at Rockwell, I could successfully perform in all rounds because of the indepth knowledge I got from Cranes in programming and hardware modules.

Shivaprasad S C

Shivaprasad S C
Placed in Rockwell Collins
June 2018

First of all I'm thanking all the faculties for upgrading our knowledge in C and DS modules, The training helped me to gain good experience in programming. It was difficult to get placement opportunities because I was a 2015 pass-out & had previously worked in different domain. So i joined Cranes Varsity to get a job in my core area, Finally got placed at sarasoft! It was a Dream come true for me. Thank you Cranes!

Githesh Pulikkal

Githesh Pulikkal
Placed in Sarasoft
June 2018

I am Chaithra. I completed my B.tech in 2015. I am feeling very grateful to cranes varsity which helped me to start my career with sharp software development India pvt ltd. Training at the institute helped me to gain knowledge in c,data structure,c++,matlab,ARM,GPOS. written test was based on aptitude,c and linux. Technical round they asked mainly c programming and basics of linux. The mock interview &placement test was really helpful to crack the test and technical round. Thanks a lot all trainers,placements team and staff.

Chaithra Harisree

Chaithra Harisree
Placed in Sharp Software
April 2018

After completing my Engineering in 2017 , Electronics and communication stream , from Hirasugar Institute of Technology, Nidasoshi. I was searching job for almost 6 months but i did not get any good opportunities. As per my senior suggestion i joined Cranes Varsity for ITAP-Embedded system designing course in December-2017. This course contains C , Data structure , ARM-Programming , MATLAB , GPOS , C++ etc. Cranes Varsity has good environment for learning with well equipped labs and good faculties. After completing 4 months of training i got an opportunity to attend Robert Bosch placement drive , it was my first interview with the help of cranes varsity training i got selected in Robert Bosch. i would like to thank all the teaching and non-teaching faculty and placement department of Cranes Varsity.

Krishna Potadar

Krishna Potadar
Placed in Robert Bosch
March 2018

I am Rajasekar A, completed B.Tech Electronics and Communication Engineering from VIT University, Vellore. Even though I have technical skill I lagged in programming. After attending may interviews in my university I got selected in Tech Mahindra as an Software Engineer. After completing my Degree I started focusing on my programming skills. But at certain core concepts i struggled a lot. At that time I came to know about CRANES VARSITY, Bangalore. During the month of November i joined Cranes for Professional Diploma Training in Embedded System Design. I started with C module. In my first week itself I was able to code myself using my own logic. Then started my Data Structure module the faculty was friendly and he was able to shape my coding skill. He made me to write optimized codes. Then I started my GPOS and Matlab module parallel even though GPOS module was new to me the faculty was able to give me clear cut idea of the flow and the working of the Kernal. Then I started my ARM7 module which was explained in a clean and neat manner. After this module I am able to design many real time applications.Then started my Linux Device Driver, Real Time Operating System, Python modules which gave me few more core ideas and made me to differentiate from others. Now I can say I am able to design a device driver and explain the flow of Kernal operation and write a code to optimize the work flow. The way the faculties guide us is excellent. They care about my future. At last I got placed in Robert Bosch. Thank you Cranes.

Rajasekar A

Rajasekar A
Placed in Robert Bosch
March 2018

I'm Nimmy Sethunath.I have completed my B.Tech (Electronics and Communication) from Thejus Engineering College,Kerala.Once after my passout in 2017,I worked with Think And Learn pvt.ltd as a BDA. When i seriously wished to start a career in my core field,i decided to join Cranes Varsity,bangalore. I joined cranes on january 2018 for ITAP-Embedded system course. Cranes has always supported in the journey of my education from a fresher to a professional. I completed the modules of c, data structure and ARM ,once before i got the interview call for Robert Bosch.It was easy for me to crack the interview with the knowledge i have gained from Cranes. Now,i'm placed at "Robert Bosch Engineering and Business Solutions", coimbatore location. It was my first interview from cranes and i'm really grateful for the same. As a fresher,who thought,getting in to core field was difficult, Cranes showed the right track. I thank all the faculties,who showed their great support and knowledge which led me to fulfill my dream career!! Thankyou CRANES !!!

Nimmy Sethunath

Nimmy Sethunath
Placed in Robert Bosch
March 2018

My name is Sundaram Bhaskar, did my BE from KLS Gogte Institute of Technology, EEE background and 2017 pass out. From my college I got to know about Cranes Varsity, Bangalore. In Cranes I did Embedded system Design courses C, C++, MATLAB, ARM7, RTOS, and LINUX. During college I had limited knowledge about these but after undergoing these courses in Cranes I learnt about these and got confidence which helped me to crack the interview. From Cranes got many opportunities for the interview and finally got selected in Easun Reyrolle in R & D Department. I want to thank all the faculty members and Namitha madam because of whom I am able to crack the interview. Thanks a lot Cranes Varsity

Liya Mathew

Sundaram Bhaskar
Placed in Easun Reyrolle
October 2018

After completing my B.Tech in ECE, I immediately joined in Cranes Varsity with reference of my mentor 'Lokesh Krishna'. The classes are very good and for each batch there are only few students which is very helpful in asking questions and clarifying doubts. During my course I was given an opportunity to attend the interview with Safran Engineering Services and got placed immediately. I am very pleased for getting placed in my first attempt. This happened due to staff training and their support. They encouraged me a lot. I will never forget the staff who were responsible for getting through the interview........Thank You Cranes Varsity

Divya Varghese

Ram Prakash Reddy
Placed in Safran Engineering Services.
September 2018

Cranes Varsity a good platform for Embedded system. I joined cranes as i was very specific to my domain. I was trained in core programming languages like C,C++,Data structure, Embedded C, GPOS,RTOS,LDD and concepts like Arm7, different protocols. The mock interviews and module tests helped me a lot to crack interview. Finally i got placed in HCL Technology with automation domain.

Divya Varghese

Amer Sohail
Placed in HCL Technologies.
Augest 2018

My year of engineering pass out is 2015 and I was so much worried about my career due to 2 years of gap and later through one of my friend, I came to know about Cranes and I joined Cranes in early 2018 and got selected in HCL Technologies.Cranes Varsity is a very good platform for those who want to begin their career in Embedded System

Divya Varghese

Alameen v
Placed in HCL Technologies.
July 2018

I completed B.E in medical electronics in the year 2017. As a fresher it is very difficult to get a job in core company. I was looking for a job and one of my friend suggested me Cranes Varsity. I joined for PG Diploma in Embedded System Design where I learnt C, C++, MATLAB, ARM, GPOS Etc.

Angel George

Angel George
Placed in Renault–Nissan–Mitsubishi
May 2018

I completed my engineering from MSRIT in the year 2017. Since I was interested and I was looking for opportunities in Embedded domain, my friend suggested me about Cranes Varsity. I joined Cranes Varsity in Dec 2017 & I got placed in Harman Connected Services. I would like to thank all at Cranes Varsity for their continuous efforts.

Varshitha M

Varshitha M
Placed in Harman Connected Services
May 2018

My knowledge on Matlab, ARM and C++ when I came to Cranes were next to nothing. The modules that were covered here are designed very comprehensively that it helped me get into BOSCH with much ease and the modules were taught very practically in the hands on session. The approach to the modules was very much Industry-oriented that helped me tackle technical questions in the interview easily.

Ravindranath Muppala

Ravindranath Muppala
Placed in Robert Bosch
May 2018

Cranes Varsity is one of the best training institute to start a career in Embedded domain as they cover the modules required by the industry . specially the Communication protocols topics- I2C, SPI, UART AND CAN. The trainers are very knowledgeable, friendly and encouraging. Cranes provided me with fare number of job opportunities in core companies. I'm really happy to say that I got placed in HARMAN through Cranes.

Sumitha Reddy

Sumitha Reddy
Placed in HARMAN
May 2018

I completed my B.Tech(EEE) 2016, & M.Tech in embedded systems .Being a post graduate in embedded systems also I couldn't get into the core job. So my friends suggested me Cranes varsity, Here I got good knowledge in Embedded Systems, RTOS, GPOS, Matlab & hands on experience on ARM boards. Finally I got placed in Mahindra Electric mobility Ltd. one of my dream domain. Once again I thank the cranes team and trainers for giving me complete support to enter into a core job.

Naveen R

Naveen R
Placed in Mahindra Electric Mobility Ltd.
May 2018

I Pavan Kumar Studied in Acharya Institute of technology have Graduated in 2017 in ECE Stream , As per my Seniors and college faculty suggestion ,i joined Cranes Varsity on DEC-2017 and i have completed modules c,c++,Matlab,DS,Gepos,Arm. The faculties here are very good and are very co-operative in helping student's doubts and i have got placed in ROBERT BOSCH from CRANES VARSITY on my first oppurtunity.

Pavan Kumar

Pavan Kumar
Placed in Robert Bosch
March 2018

I am T M Uma Maheshwari. I did my engineering in Sri Sairam Institute Of Technology,Chennai. I did my BE in Electrical and Electronics Engineering and passed out in 2017. I didn't get any opportunity in my college placement. I joined Cranes Varsity on december. The modules i learnt are C,Data Structures,ARM,MATLAB,GPOS,RTOS,C++. In every module , I learnt many things. its very comfortable to clarify my doubts with my trainers. My logical thinking increased,because we did everything practically. Lab facilities are also good.Module test and placement test helped me a lot to know about my standards and what efforts I have to put on.Mock test helped me to overcome my inferiority complex and gave me confidence also. This is my first placement in Cranes Varsity and I got placed in ROBERT BOSCH. Thanks for Cranes Varsity for supporting me and for the opportunity u gave.

Uma Maheshwari

Uma Maheshwari
Placed in Robert Bosch
March 2018

I am Sujith A.S ,Graduated from College of Engineering Kidangoor in Electronics and communication stream 2017.After that I joined ITAP course in Cranes Varsity.This institution helped me to achieve more knowledge in C,Data structure,Arm,MATLAB etc..I had experienced a lot of opportunities to attend interview of many companies.Cranes has become a turning point in my life.Because now I am placed in BOSCH.I would like to thank Cranes Varsity for providing me such an opportunity.

Sujith A.S

Sujith A.S
Placed in Robert Bosch
March 2018

I am Liya Mathew, a Btech graduate in Electronics and Communication, Engineering, from College of Engineering, Kidangoor. I would like to thank Cranes Varsity for helping me to get placed at Bosch. The Embedded system Design course which covered C,Data Structure,ARM Microcontroller and CPP helped me a lot in building my technical skills.Overall Cranes acted as a gateway towards my career.

Liya Mathew

Liya Mathew
Placed in Robert Bosch
March 2018

After my b.tech graduation in Electronics and Communication Engg. from Mangalam College of Engg. , i joined Cranes varsity for Embedded system design and they provided me with lot of job opportunities in MNC Companies. All the modules such as C programming, data structure and Arm micro controller that were taught in cranes really helped me to get placed in BOSCH.

Justin Walston

Justin Walston
Placed in Robert Bosch
March 2018

It gives me great pleasure to say with pride that i have completed my post graduate diploma on ITAP embedded systems design from Cranes Varsity Bangalore , and i got placed in HCL technologies.The relationship between faculties and students is very cordial which gave me an opportunity to excel in my area of interest. I am a 2016 passed out M.Tech graduate in VLSI Design and it was my ultimate high to start a career in electronics related domain.And it is through cranes that i could achieve it. I would like to thank all the faculties, staff and all my friends in cranes varsity for their great support.

Rima N

Rima N
Placed in HCL Technologies
February 2018

Hi, I’m Praveen KC; I completed my BE-EEE in 2017 but didn't get opportunities in college. After my graduation was on the look for jobs, but didn't find opportunity in good companies. Then I heard about Cranes Varsity from one of my friends and joined in month of March. The faculties here taught us well and covered Modules(C, C++, MATLAB, ARM, and LINUX) which are required for existing Embedded and software Industry. Best thing about Cranes is we get opportunities until placed .Finally I got selected in Cerium systems. I really thank and am grateful to every staff of Cranes Varsity.

Liya Mathew

Praveen KC
Placed in Cerium systems
October 2018

After completing B.E., in 2017, I was finding it difficult for me to get placed through college campus interviews and was in the lookout for a job for almost a year. Then I joined Cranes Varsity where I learnt many modules. The faculties are very helpful. The facility there is Cranes is such that both Class and labs are in a single room so it helps us a lot to learn topics very easily. They gave me more than 10 opportunities and finally I got placed in L&T Technology Services.

Liya Mathew

Sadashiv Mathapati
Placed in L&T Technology Services.
September 2018

Cranes Varsity is a great platform to kick start our career in core domains.Faculties here extend great support to each and every students. I wholeheartedly thank both technical and non technical staffs of cranes varsity.

Liya Mathew

Liya Mathew
Placed in HCL Technologies
Augest 2018

I am a B.Tech Graduate in ECE in the year 2017.As a fresher it is very difficult to get placed in core companies.but cranes made that one true.My brother's friend suggested me to join in cranes who got placed,so i joined in cranes varsity for embedded systems and design course where i enhanced my skills in C,MAT LAB,about micro controllers and especially in automotive protocols.Finally i got placed in "HCL Technologies".It was a dream comes true for me.I thank to all at cranes varsity for giving complete support to enter into a core job.

Divya Varghese

Saikeerthi Melarkod
Placed in HCL Technologies.
July 2018

I am a Btech graduate in ECE from COE, Kidangoor. I would like to thank Cranes Varsity for helping me to get placed at Bosch. The Embedded system Design course which covered C,Data Structure,ARM Microcontroller and C++ helped me a lot in building my technical skills. Overall Cranes acted as a gateway towards my career.

Liya Mathew

Liya Mathew
Placed in Robert Bosch
April 2018

I completed BE (EEE) in 2017 and joined cranes varsity in oct-2017 for a program called ITAP -Embedded system design which is a placement oriented program. I studied core subjects like C, C++, Arm, GPOS & RTOS. Before completion of my course I got many opportunities and I finally got placed in L&T technology. Because of cranes varsity I got my dream job. Thanks to cranes varsity management & trainers.

Kiran Meti

Kiran Meti
Placed in L&T Technology
April 2018

I am a Btech graduate in ECE from COE, Kidangoor. I would like to thank Cranes Varsity for helping me to get placed at Bosch. The Embedded system Design course which covered C, Data Structure, ARM Microcontroller and C++ helped me a lot in building my technical skills. Overall Cranes acted as a gateway towards my career.

Sankirth Gunnam

Sankirth Gunnam
Placed in HARMAN
April 2018

All the modules taught in Cranes were very useful to get placed in required field. Getting a deep and concrete knowledge about the course along with our Engg. basics helped us a lot to get the job. Studying Modules like C, DS, Linux Embedded (ARM), Matlab helped me a lot during the interview. Cranes has helped us a lot in all aspects.

Sushmita Boiti

Sushmita Boiti
Placed in HARMAN
April 2018

I have completed Engineering in Electrical and Electronics branch, from SDMCET , Dharwad in 2017. Even after 6 months from graduation, I had no job in any company, then I heard about Cranes Varsity from my friends. I joined the course ITAP in Embedded Systems Design. I learned many modules like C, Data Structures, ARM7 Programming, CAN & AUTOSAR, MATLAB etc. I got my first opportunity in Robert Bosch. Thanks to the modules like ARM7 Programming, CAN & AUTOSAR, I was able to get placed in my first opportunity itself. The ITAP program of 4 months gave me all confidence and knowledge to attend and succeed in interview. Thank you Cranes for providing such skilled trainers, required hardwares and softwares and a great career opportunity.

Sharad Jogalekar

Sharad Jogalekar
Placed in Robert Bosch
March 2018

I,SHAIK MOHAMMED SUHAIL have joined ITAP-EMBEDDED DESIGN course. I have completed various modules like c, Data structures, ARM7, AUTOSAR, CAN PROTOCOL, GPOS, RTOS. All the modules were fulfledged with excellent teaching from the trainers in terms of Interview point of view and even project point of view. I have done real time projects like Electronics Voting Machine, Hand Gesture Recognition using MATLAB. C and Data structures modules were explained in detail for more than 2 months. And ARM module was the best with real time working on board (LPC2129). As per details provided about placements, they made words into implementation. At last i have got placed in my first placement opportunity at Robert Bosch. Finally, i would like to thank all the trainers and especially the Cranes Team for supporting in all aspects and providing the best platform for embedded Design. Thank you Cranes.

SHAIK MOHAMMED SUHAIL

Shaik Mohammed Suhail
Placed in Robert Bosch
March 2018

I am Nandhakumar ,completed my engineering from TCE college Coimbatore in the year 2017,after completing my engineering i was struggling to get into a core company .At the time my friend suggested me about the cranes varsity and i joined embedded ITAP course in cranes varsity .In which they made as to attain in-depth knowledge of modules such as C,DS,C++,MATLAB and ARM.with this knowledge they referred us to attend the interview at the leading core companies,and finally after 6 months of training i got placed in ROBERT BOSCH.

Nandhakumar

Nandhakumar
Placed in Robert Bosch
March 2018

I'm Bharath kumar R, 2017 pass out from The Oxford college of engineering. I underwent an embedded course at cranes varsity. The course had various modules such as c, c++, Arm, Matlab, Gpos etc which helped me gain sufficient knowledge to crack my interview. Labs are well furnished with excellent student friendly trainers. Hands on experience on embedded board helped me a lot to analyse the situation practically. Thanks to Cranes Varsity.

Bharath Kumar R

Bharath Kumar R
Placed in Robert Bosch
March 2018

After completing my Btech in 2017.I joined in Cranes Varsity for ITAP Embedded System Design course for getting job in Embedded domain.I have completed modules like C,C++,Data structure, Matlab, CAN and AUTOSAR. After that i got good knowledge on that. The Cranes have good teaching and placement departments, helped me to gain knowledge and throw the interview fear away by the mock interviews held at cranes . The projects we have done in cranes are very useful to gain knowledge and practical skills.Iam very happy that i got placed in HCL Technologies in AUTOMOTIVE department by great help of cranes.

Asiq Ali

Asiq Ali
Placed in HCL Technologies
February 2018

I am Durga P Nair. After completing my B Tech in Electronics and Communication Engineering at 2017, I was joined at Cranes Varsity Bangalore and successfully completed my ITAP Embedded System Design course, then I got placed in HCL Pvt. Ltd. It was a great time I spent in Cranes Varsity. C, C++, Matlab, ARM, Automotive and GPOS. These are the modules I am studied from Cranes. Cranes has very wonderful faculty and they are very cooperative and campus environment is very positive. Training and placement department continuously providing assistance regarding the placement. I am suggesting Cranes Varsity to new students with a lot of pleasure. Thank You.

Durga P Nair

Durga P Nair
Placed in HCL Technologies
February 2018