ARM 7_LPC 2129 Development Kit



ARM 7_LPC 2129 Development Kit

  • LPC 2129 Single-chip 16/32-bit microcontrollers 256KB Flash/128KB RAM
  • 4 Channel 10-bit ADC
  • A Serial Port for ISP
  • An RS232 Serial Port
  • Philips flash burner For Hex Downloading through Rs232 Port
  • On Board JTAG Wiggler for Debugging
  • DC Power Supply Connector(12v Ac or Dc)
  • Optional USB Socket for Power Supply
  • LCD display 2 linux 16 Character
  • 24Cxx I2C EEPROM
  • 8 LED array
  • Matrix Key Pad
  • 4 Intruupt Switches
  • Buzzer
  • Eaxample Programs for LED,ADC,CAN,LCD,UART,INT SW
  • 7-Segment LED Display(Multiplexed x4)
  • 2 CAN Ports with 2CAN TransRecivers.

LPC2129 Chip Features

  • 16/32-bit ARM7TDMI-S microcontroller
  • 16 kB on-chip RAM, 256 kB Flash Program Memory supports upto 60 MHz frequency.
  • In-System Programming (ISP) and In-Application Programming (IAP) via on-chip boot-loader software.
  • On-chip Embedded-ICE-RT, Embedded Trace Macrocell debugger
  • Two interconnected CAN interfaces with advanced acceptance filters.
  • Four channel 10-bit A/D converter with conversion time as low as 2.44 ms.
  • Multiple serial interfaces including two UARTs (16C550),
  • Fast I2C (400 kbits/s) and two SPIs
  • Phase-Locked Loop with settling time of 100 ms.
  • Vectored Interrupt Controller with configurable priorities and vector addresses.
  • Two 32-bit timers (with four capture and four compare channels), PWM unit (six outputs), Real Time
  • lock and Watchdog.
  • Up to forty-six 5V tolerant general purpose I/O pins.
  • Up to nine edge or level sensitive external interrupt pins available.
  • On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz.
  • Two low power modes: Idle and Power-down.
  • Processor wake-up from Power-down mode via external interrupt.
  • Individual enable/disable of peripheral functions for power optimization.
  • CPU operating voltage range of 1.65V to 1.95V(1.8 V ±0.15 V).
  • I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads.

Package Content

  • ARM 7 Development Board
  • Rs232 Port Cable for ISP Programming
  • Parallel Port Cable For JTAG Wiggler
  • Software CD( Phuilips Downloader, Data sheets, Example Porograms, Manual, Keil3 Evalution MAX 16 kb
  • Burg Connecter 20 Nos
  • Adapter 12 VDC